Duraflex Springboard Diving Board Factory Refinishing

SKU:REF

$2,539.00

Refinish your old or worn out Duraflex or Maxiflex diving board and get years of new life for less than half the cost of a new board!

Product Note: The Duraflex International Corporation can only refinish diving boards that have a Duraflex Factory Applied Coating. Any diving boards that have been refinished by any other means, or that have any non factory applied paint or coating applied on any part of the board, will not be accepted by the Duraflex Factory for refinishing and will either be scrapped or returned to the customer at their expense.

SHIPPING COSTS AND DATES – Current events are impacting both shipping costs and shipping dates for all Duraflex Diving Stands and Diving Boards. Shipping costs have risen considerably for shipping within the U.S. and lead times for delivery are averaging 22-24 weeks for diving boards and 3-meter stands and 8-10 weeks for short stand and 1-meter stands. If you are planning on ordering a diving board or diving stand, please plan accordingly.

All Duraflex refinishes must include this signed letter. Without this letter the Duraflex Factory WILL NOT refinish your diving board!

DURAFLEX REFINISH SIGN-OFF LETTER

Factory refinishing of Duraflex or Maxiflex diving boards involves:

Removing any current factory applied finish with a mechanical stripper.
Recoating the board with epoxy and curing it at 300 degrees Fahrenheit. Application of sand and alumina, laminated between three coats of epoxy and curing at 300 degrees Fahrenheit
Includes a set of two (2) Stainless Steel Carriage Bolts, Washers, Nuts and anti-seize lubricant with every diving board refinish — a $39.25 value!

See our CHECKLIST FOR DIVING BOARD REFINISH

In addition to the Refinish charges, the customer is also responsible for shipping charges TO AND FROM the Duraflex Factory. Follow these instructions when shipping your Duraflex Diving Board: Shipping Duraflex Diving Boards.

PRODUCT NOTE: The Duraflex International Corporation can only refinish diving boards that have a Duraflex Factory Applied Coating. Any diving boards that have been refinished by any other means, or that have any non factory applied paint or coating applied on any part of the board, will not be accepted by the Duraflex Factory for refinishing. If the diving boards that have (Factory approved) 3M Safety Walk Strips applied to them as a “band-aid fix” to get a slippery board through the end of a season — these CAN be removed by Duraflex at the factory when the board comes in for refinish. See also the information sheet entitled “Alternative to Factory Refinishing of Duraflex or Maxiflex Diving Board.”