The Duraflex Diving Board Rubber Corner Piece plugs the tip-end of the diving board and is used on all Duraflex made Diving Boards produced after 1975.
Quicksilver High-Performance Grease is a three ounce tube of clear water resistant grease that fits into the Duraflex Grease Gun (Item PM110). Use this to grease the Duraflex Fulcrum Slide Tracks and to pump grease into the "zerk" fitting (grease nipple) that is found at the base of each Fulcrum
The Duraflex Fulcrum Roller Bearing is the round plastic sleeve that fits around the Fulcrum Roller. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
Durafirm 5/8 inch Stainless Steel Hex Head Diving Stand Installation Bolt is used for attaching any Durafirm Stand or Durafirm Short Stand to Hilti Installation Kits or Duraflex Bronze Deck Anchors!
The Duraflex Fulcrum Slide Bearing is the small flat plastic piece that fits underneath the Fulcrum Roller Block (Item 517) and "slides" across the Fulcrum Slide Track (Item C208A). PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Rubber Bumper fits between the Fulcrum Roller Block (Item 517 ) and Fulcrum Slide Bearing (Item 518) to allow fulcrum ease of movement and noise reduction. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Calibrated Strip is the 1-9 Number Sticker that attaches to the diving board in the fulcrum area so the diver knows on what "number" they should set the fulcrum prior to doing a dive.
The Duraflex Roller Clamp Stud works in conjunction with the Roller Clamp Lock Nut (Item SF152) to hold the Roller Clamp (Item 521) in place. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
$18.15Original price was: $18.15.$9.00Current price is: $9.00.
The Duraflex "Buff-Colored" Paint Kit is used to touch-up small areas of a Duraflex Diving Stand, or is used to coat any exposed part of a bolt or nut that goes into a diving stand. Examples are Guard Rail Arm Bolts and Nuts; Hinge Bolts and Nuts; Fulcrum Box Bolts
This Duraflex Aluminum Hex-Head Bolt and Nut is used for attaching Hinges to the Back Anchor Fitting or "Short" Stand Back Anchor Fittings. PRICED INDIVIDUALLY - the four shown are what it takes to attach a Duraflex Hinge to a Back Anchor Fitting.
The Duraflex Fulcrum Zerk Fitting is the small Grease Gun fitting found on each Fulcrum Roller Block (Item 517). PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Anti-Rattle Bolt and Nut Set is the long aluminum bolt that goes through the Fulcrum Assembly and holds the Anti-Rattle Clamp (Item 516) tightly in place with the nut correctly adjusted.
This Duraflex Aluminum Hex-Head Bolt and Nut is used to attach Guardrail "Arm" Supports to the Fulcrum Box AND for attaching "Cross Braces" to the Main Supports.
The Durafirm Diving Stand Guardrail Plug inserts into the end of each guardrail. It is not only a safety feature, but also it helps keep noise level down when diving boards are in use.
The 3/8 inch x 1 1/4 inch bolt is used to bolt the hinge plate to ladder. Heads of these bolts are painted. We recommend ordering a Buff Touch-Up Paint Kit to coat the threads and nut after assembly. Picture shown shows assembled and unassembled - Priced per one (1) bolt and nut.
$5.20Original price was: $5.20.$4.20Current price is: $4.20.
The Duraflex Stainless Steel Tie Plate Bolt, Nut and Washer are used to attach ("Tie" together) the Tie Plate (Item 522) to the two Roller Blocks (Item 517) on the fulcrum assembly.
Duraflex Nyliners (aka Hinge Pin "Bushing") surround the hinge pin in a Duraflex Hinge Assembly. FOUR of these are required to re-build ONE Hinge. PRICED INDIVIDUALLY - The four (4) Nyliners shown are what it takes to outfit one (1) Duraflex hinges.
The Duraflex Stainless Steel Guard Rail Attachment Bolt is used with the Stainless Steel Guardrail Clamp (Item C207) to attach Guard Rail Tubing to the Guard Rail Arms on all Diving Stands.
The Duraflex "O" Ring for the Duraflex Hinge Pin, fits on the slotted groove at each end of the Duraflex Hinge Pin (Item C203) to keep the Nyliners (Hinge "Bushings" -- Item C209) and Hinge Pin from working itself out of the Duraflex Hinge. Two Duraflex "O" Rings are needed per individual
Springboards and More currently has previously owned Duraflex 3-meter Diving Stands for Sale. These 3-meter Stands are sold "as is" but include all new Duraflex components. Pricing depends on the condition and age of the stand in question. Sale DOES NOT include springboard. Current inventory is listed below.
All reconditioned 3-meter
Springboards and More currently has previously owned Duraflex Short Stands for Sale. These Short Stands may be sold "as is" or refurbished to the customers specifications. Pricing depends on the condition and age of the stand in question.
All reconditioned Short Stands will be stripped and powder coated to the color
