A Springboards and More EXCLUSIVE! The Fulcrum Repair Kit includes everything you need to repair ONE SIDE of a Duraflex Fulcrum Assembly EXCEPT the Roller Block! In order to repair both sides of fulcrum you will need TWO of these kits.
The Duraflex Fulcrum Slide Track is attached to the Stand Box and allows the fulcrum to slide forward and backward underneath the springboard. PRICED INDIVIDUALLY - one slide track and five (5) installation bolts.
Hilti HIT HY 200-R High Strength Epoxy is used to install Duraflex Diving Stands on existing pool deck using stainless steel threaded rod or stainless steel internally threaded inserts.
Use the NEW Duraflex 2-Part Glue Kit with Applicator to attach the (Black) Rubber Channels to underside of diving board or to re-attach a Fulcrum Footwheel to the Fulcrum Roller (use Expansion Pin as well for this job).
The Duraflex Stainless Steel Diving Board Bolt and Nut are used to install any Duraflex Diving Board to any and all Duraflex Diving Stands. (Attaches diving board to Durafirm Hinges). Each order includes Two of these "Carriage" Bolts and Nuts - two bolts are required to install a Diving Board
The Duraflex Fulcrum Tie Plate is the rectangular piece of anodized aluminum that holds ("ties") together the two Fulcrum Roller Block Assemblies (Item 517).
The 18 Piece Duraflex Square Shim Set includes 18 square shims of varying thicknesses, and is used when installing a Duraflex Diving Stand (1 Meter or 3 Meter) to a pool deck to help level the stand.
The Duraflex Guardrail Repair Kit is a Springboards and More Exclusive! Contains all hardware needed to attach a guardrail to a Duraflex Diving Stand. All diving programs should keep one of these kits on hand in case of guardrail problems.
A set of eight (8) Durafirm Cast Bronze Diving Stand Anchors is used when pouring a new pool deck to attach any Duraflex One- or Three-Meter Diving Stand to the pool deck.
A set of six (6) Duraflex Cast Bronze Diving Stand Anchors is used when pouring a new cement pedestal to attach a Duraflex Short Stand to the pool deck.
The Duraflex Hinge Attachment Harware Kit includes everything you need to attach ONE HINGE to a Duraflex Ladder Assembly! In order to repair both hinges you will need TWO of these kits.
The Duraflex Grease Gun is used to lubricate the Fulcrum Slide Tracks (Item C208A) and Roller Block Assemblies (Item 517) on a Duraflex Fulcrum Assembly.
The Duraflex Hinge Repair Kit usually will solve the problem of the loud noise coming from the Hinge area when the diving board is bounced. The noise you hear is usually the result of broken or missing Nyliners (Item C209) and / or a moving Hinge Pin (Item C203). The
Use the Duraflex 2-Part Glue Kit to attach the (Black) Rubber Channels to underside of diving board or to re-attach a Fulcrum Footwheel to the Fulcrum Roller (use Expansion Pin as well for this job).
The Duraflex Fulcrum Roller Clamp is the horseshoe-shaped metal piece that holds the Fulcrum Roller to the Roller Block Assembly (Item 517). PRICED INDIVIDUALLY - the two shown make up what is needed on one Duraflex Fulcrum.
The Duraflex Anti-Rattle Clamp fits underneath the Fulcrum Slide Track (Item C208A) and holds the Roller Block Assembly (Item 517) to it. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex 5/8 inch x 3 inch Aluminum Hex Head Bolt and Nut is used to attach the Fulcrum Box to the Main Support ("Legs") of a Duraflex Diving Stand.
Loctite 243 Threadlocker is used when installing, or reinstalling diving boards and carriage bolts and attachment bolts, or any item that requires a nut and bolt. This lubricant helps to hold nuts and firmly to a bolt reducing the chance of a loose nut and bolt.
Duraflex Zinc-Plated Steel Diving Board Bolts are used for bolting a Duraflex Diving Board to a NON-Duraflex Diving Stand (where a standard 5/8 inch x 3 1/2 inch Bronze Board Bolt is not long enough). Two (2) are required for board installation.
The Duraflex hinge pin inserts into both the male and female parts of the hinge, holding them together and allowing them to work properly as the diving board bounces.
This Duraflex Aluminum Hex-Head Bolt and Nut is used to when attaching the Diving Stand Aluminum Guardrail Bracket to the Short Stand Back Anchor Fitting. The Diving Stand Aluminum Guardrail Bracket is used to attach a guardrail to the diving stand.
A Springboards and More Exclusive! The Duraflex Guardrail Clamp Kit includes all the neccessary hardware to keep your guardrail attached to the Duraflex Diving Stand. Keep a few extra Guard Rail Clamps and Installation Bolts on hand in the event that one breaks or is missing!
