The Duraflex Anchor Fitting (aka "Hinge Plate") is the cast aluminum piece that attaches to the top of a Durafirm One-meter or Three-meter Ladder Assembly. NEW and IMPROVED – the Anchor Fitting now comes with slotted (oval) holes allowing for left to right adjustment making diving board alignment quicker and easier.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Diving Stand to the pool deck. This product allows for the installation of either the front or back portions of a 1m or a 3m diving stand.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a 1-meter or 3-meter Duraflex Diving Stand to the pool deck. Does not include Applicator Gun.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Short Stand to the pool deck. This product allows for the installation of either the front or back portions of a short stand.
The Duraflex Anchor Fitting (aka "Hinge Plate") is the cast aluminum piece that attaches to the top of a Durafirm One-meter or Three-meter Ladder Assembly. This Hinge Plate is available with NO hinges, with USED Hinges, or with NEW Hinges.
This item is used, but has been refurbished. It is the "old
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Short Stand to the pool deck. Does not include Applicator Gun.
The Duraflex Double Guardrail Support ("Arm") attaches to the Fulcrum Box and holds the double guardrails. This item attaches to the left front or right rear of your Duraflex Fulcrum Box.
In order to receive an accurate quote, please download and completely fill out the Duraflex Guardrail Questionnaire, and return it
The Duraflex double guardrail support attaches to the fulcrum box and supports the double guard rails. This item attaches to the right front or left rear of your Duraflex Fulcrum Box.
In order to receive an accurate quote, please download and completely fill out the Duraflex Guardrail Questionnaire, and return it
The Duraflex Footwheel is only sold attached to the Duraflex Fulcrum Roller. The Footwheel with SHORT Fulcrum Roller is used on Duraflex Diving Stands WITHOUT guard rails.
The Duraflex Board Cover is an essential piece of equipment that helps venues protect their Duraflex diving boards, increasing the life span and effectiveness of your Duraflex Springboard.
When purchased in with a new or resurfaced springboard, receive a $50 discount.
The Duraflex Footwheel is only sold attached to the Fulcrum Roller. The Footwheel with LONG Fulcrum Roller is used on Duraflex Diving Stands WITH guard rails.
The Duraflex Anchor Fitting (aka "Hinge Plate") is the cast aluminum piece that attaches to the top of a Durafirm One-meter or Three-meter Ladder Assembly. Purchase this item if you already have a set of Durafirm Hinges to attach to it.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Diving Stand to the pool deck. This product allows for the installation of either the front or back portions of a a 1m or 3m diving stand.
The Duraflex curved guardrail is the "Top" guardrail used on Duraflex Diving Stands and Short Stands with guardrails included.
In order to receive an accurate quote, please download and completely fill out the Duraflex Guardrail Questionnaire, and return it to steve@springboardsandmore.com.
The Duraflex straight rail is the "Bottom" guardrail used on Duraflex Diving Stands.
In order to receive an accurate quote, please download and completely fill out the Duraflex Guardrail Questionnaire, and return it to steve@springboardsandmore.com.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Short Stand to the pool deck. This product allows for the installation of either the front or back portions of a short stand.
The new step feature a two-piece design that allows replacement of the slip-resistant tread without the need to disassemble the ladder. The aqua-colored tread features the same high-quality slip-resistant surface as our springboards. With a nearly twice the surface area, divers will immediately notice the increase in comfort when using this new
The Duraflex Complete Hinge Assembly holds the diving board to the Anchor Fitting of Duraflex One-Meter, Three-Meter or "Short" Stands. The Hinge Assembly comes with five (5) Duraflex 3/8 inch x 1 1/2 inch Aluminum Hex Head Bolt and Nuts (Item SF106), but does not include the Duraflex Diving Board
The new steps feature a two-piece design that allows replacement of the slip-resistant tread made from the same high-quality slip-resistant surface as a Duraflex springboard.
This replacement kit contains everything needed to the replace the “black back” of your competition model (post 2010) “Cheeseboard” including top and bottom plate with bolts to mount to Maxi-B diving board as well as gaskets, safety walk strip and Loctite 263 Thread-locker.
$308.00Original price was: $308.00.$155.00Current price is: $155.00.
This Reconditioned Duraflex Complete Hinge Assembly holds the diving board to the Anchor Fitting of Duraflex One-Meter, Three-Meter or "Short" Stands.
This item has been cleaned and re-built with NEW Hinge Pin (Item C203); NEW Nyliners (Item C209) and NEW O-Rings (Item C210) and includes NEW Hinge Attachment Bolts (Item SF106)
The Duraflex Guardrail Bracket allows for the attachment of Duraflex Guardrails to the back of a Duraflex "Short Stand" where previously there had been none. Includes installation hardware.
The Durafirm Guardrail Bracket allows for the attachment of Durafirm Guardrails to the back of a Durafirm "Short Stand" where previously there had been none. Includes installation hardware.
$273.00Original price was: $273.00.$140.00Current price is: $140.00.
This Rebuilt Duraflex Complete Roller Block Assembly attaches to the Fulcrum Stand Box (Item SB401C) and holds the Footwheel and Roller. Rebuilt using all NEW Duraflex parts.
Compare to a New Duraflex Roller Block Assembly (Item 517) priced at $273.00.
Limited Quantities … Act Now!
The Duraflex Square Shim Set includes 36 square shims of varying thicknesses, and is used when installing a Duraflex Diving Stand (1 Meter or 3 Meter) to a pool deck to help level the stand.
