Norberts Replacement Foam – 7.5x12x32 Pit

For a Norberts 7.5 x 12 x 32 Landing Pit, replacement foam can be chosen for FOUR Layer Types. Five layers are required and each are priced individually.

• Foam layer is 6 inches thick and is the LONG ripple foam for layer number 2 OR 4 of a five layer pit. Priced for each layer.
• Foam layer is 6 inches thick and is the SHORT ripple foam for layer number 3 of a five layer pit. Priced for each layer.
• Foam layer is 7 inches thick and is the Solid flat slab for the top  of a six layer pit. Priced for each layer.
• Foam layer is 7 inches thick and is the Solid flat slab for the bottom layer of a six layer pit. Priced for each layer.

ALL Norbert’s Landing Pits Feature:

• Norbert’s exclusive multiple layers of foam in various thickness and compressions. If one layer of foam wears out or gets damaged, you can easily replace that layer only.
• Constructed of a ripple lattice design for even softer landings.
• All covers have breather material top for optimal air expulsion needed in larger mats.
• All Norbert’s Landing Pits feature a 4 inch wide hook and loop fastener strip around the top of the pit. The “lid” of the pit cover fastens onto this strip and can be tightened down as needed when the foam compresses over time.
• Norbert’s Landing Pits are available in your choice of 11 (eleven) vinyl colors and 5 (five) mesh colors at no additional cost. The default color is Royal Blue vinyl and Royal Blue mesh.
• Trying to match school or team colors? To get an idea of what your pit will resemble, please keep in mind the following: Norbert’s landing pits have a mesh top and mesh on the top half of the side walls that encirle the entire pit. The bottom half of the side walls and the bottom of the pit are solid vinyl as well as the 4 inch Velcro band that goes around the top.
• All pits are shipped UNASSEMBLED making it easier to move the pit to where you need it.
• Assembly takes approximately 45 – 60 minutes. Pits can be easily disassembled for easy movement and transportation – an added plus when your dryland room is in a converted racquetball court!
• Check out our EXCLUSIVE One-Meter (40 inch) Landing Pits! This idea was conceived by Ron O’Brien – 5x U.S. Olympic Diving Coach. The purpose is to land on a pit that is the same height or even a few inches higher than your dryland diving board.
• Installation and Assembly Instructions for : 32-inch Landing Pit; 40-inch Landing Pit
• The normal “lead time” (date of order to date of shipment) for most pits and mats will vary depending on the product and if there is any customization, but could take up to 10-12 weeks. Please make sure you check with us prior to ordering you merchandise.