The Duraflex 5/8 inch x 3 inch Aluminum Hex Head Bolt and Nut is used to attach the Fulcrum Box to the Main Support ("Legs") of a Duraflex Diving Stand.
The Duraflex Square Shim Set includes 36 square shims of varying thicknesses, and is used when installing a Duraflex Diving Stand (1 Meter or 3 Meter) to a pool deck to help level the stand.
The new step feature a two-piece design that allows replacement of the slip-resistant tread without the need to disassemble the ladder. The aqua-colored tread features the same high-quality slip-resistant surface as our springboards. With a nearly twice the surface area, divers will immediately notice the increase in comfort when using this new
The Duraflex "Buff-Colored" Paint Kit is used to touch-up small areas of a Duraflex Diving Stand, or is used to coat any exposed part of a bolt or nut that goes into a diving stand. Examples are Guard Rail Arm Bolts and Nuts; Hinge Bolts and Nuts; Fulcrum Box Bolts
The Duraflex Fulcrum Zerk Fitting is the small Grease Gun fitting found on each Fulcrum Roller Block (Item 517). PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Guardrail Repair Kit is a Springboards and More Exclusive! Contains all hardware needed to attach a guardrail to a Duraflex Diving Stand. All diving programs should keep one of these kits on hand in case of guardrail problems.
The Duraflex One-meter Diving Stand is the commonly used diving stand for competition in the world, and when coupled with Duraflex Springboards, divers are given the best chance for success with the ultimate in springboard diving equipment.
SHIPPING COSTS AND DATES - Current events are impacting both shipping costs and shipping
Refinish your old or worn out Duraflex or Maxiflex diving board and get years of new life for less than half the cost of a new board!
Product Note: The Duraflex International Corporation can only refinish diving boards that have a Duraflex Factory Applied Coating. Any diving boards that have been
The 18 Piece Duraflex Square Shim Set includes 18 square shims of varying thicknesses, and is used when installing a Duraflex Diving Stand (1 Meter or 3 Meter) to a pool deck to help level the stand.
The new steps feature a two-piece design that allows replacement of the slip-resistant tread made from the same high-quality slip-resistant surface as a Duraflex springboard.
The Duraflex Fulcrum Tie Plate is the rectangular piece of anodized aluminum that holds ("ties") together the two Fulcrum Roller Block Assemblies (Item 517).
The Duraflex Fulcrum Parts Kit includes everything you need for a Duraflex Fulcrum. Tie Plate, Footwheel, Rubber Bumber, Slide Bearming ... It's all there!
Duraflex Short Stands provides a solid base for a new or used springboard, and will have less movement than full one-meter or three-meter diving stands. The version with guardrails is recommended for short stands installed as a stand-alone unit.
SHIPPING COSTS AND DATES - Current events are impacting both shipping costs and
The Duraflex Hinge Attachment Harware Kit includes everything you need to attach ONE HINGE to a Duraflex Ladder Assembly! In order to repair both hinges you will need TWO of these kits.
This Hilti Stainless Steel Concrete Inserts Package is used when installing and attaching any 1-meter or 3-meter Duraflex Diving Stand to the pool deck.
The Duraflex "Short Stand" Back Anchor Assembly is the "back part" of a Duraflex "Short Stand," and is attached to the concrete pedestal. This assembly is for short stands that do not include guardrails.
Duraflex Short Stands provides a solid base for your springboards, and will have less movement than full one-meter or three-meter diving stands. This version of the short stand is best installed on a concrete base surrounded by railings for safety.
SHIPPING COSTS AND DATES - Current events are impacting both shipping costs
This replacement kit contains everything needed to the replace the “black back” of your competition model (post 2010) “Cheeseboard” including top and bottom plate with bolts to mount to Maxi-B diving board as well as gaskets, safety walk strip and Loctite 263 Thread-locker.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Diving Stand to the pool deck. This product allows for the installation of either the front or back portions of a a 1m or 3m diving stand.
