“Carpetboard” has been added to your cart. Continue shopping
Showing 31–60 of 119 resultsSorted by popularity
Add to cart
Duraflex Step Insert Attachment Bolt With Nut
$5.06
The Step Insert Attachment Bolt With Nut is used to attach the NEW Duraflex Step Insert to the Step Frame.
Select options
Duraflex Diving Stand 5/8 Inch Installation Bolt
$13.43 – $13.85Price range: $13.43 through $13.85
Durafirm 5/8 inch Stainless Steel Hex Head Diving Stand Installation Bolt is used for attaching any Durafirm Stand or Durafirm Short Stand to Hilti Installation Kits or Duraflex Bronze Deck Anchors!
Add to cart
Square Shim Set (36 Piece)
$143.85
The Duraflex Square Shim Set includes 36 square shims of varying thicknesses, and is used when installing a Duraflex Diving Stand (1 Meter or 3 Meter) to a pool deck to help level the stand.
Add to cart
Duraflex Fulcrum Slide Track Bolt
$3.94
The Duraflex 3/8 inch x 1 inch Aluminum Hex-Head Bolt is used to install Fulcrum Slide Track (Item C208A)to the Stand Box (Item SB401C).
Add to cart
Duraflex Fulcrum Box Attachment Bolts, Washers And Nuts
$24.48
The Duraflex 5/8 inch x 3 inch Aluminum Hex Head Bolt and Nut is used to attach the Fulcrum Box to the Main Support ("Legs") of a Duraflex Diving Stand.
Add to cart
Duraflex 30-inch Rubber Channel Set With Glue Kit
$365.00
The Duraflex 30 Inch Rubber Channel Set contains EIGHT (8) Rubber Channels that are 30 inches long with NEW 2-Part Glue Kit and Applicator.
Add to cart
Duraflex Diving Stand Ladder Step
$290.00
The new step feature a two-piece design that allows replacement of the slip-resistant tread without the need to disassemble the ladder. The aqua-colored tread features the same high-quality slip-resistant surface as our springboards. With a nearly twice the surface area, divers will immediately notice the increase in comfort when using this new
Add to cart
Guardrail Repair Kit
$61.43
The Duraflex Guardrail Repair Kit is a Springboards and More Exclusive! Contains all hardware needed to attach a guardrail to a Duraflex Diving Stand. All diving programs should keep one of these kits on hand in case of guardrail problems.
Add to cart
Buff-Colored Paint Kit
$19.74
The Duraflex "Buff-Colored" Paint Kit is used to touch-up small areas of a Duraflex Diving Stand, or is used to coat any exposed part of a bolt or nut that goes into a diving stand. Examples are Guard Rail Arm Bolts and Nuts; Hinge Bolts and Nuts; Fulcrum Box Bolts
Add to cart
Fulcrum Zerk Fitting
$9.64
The Duraflex Fulcrum Zerk Fitting is the small Grease Gun fitting found on each Fulcrum Roller Block (Item 517). PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
Add to cart
Duraflex 30-Inch Rubber Channel Set
$131.00
The Duraflex 30 Inch Rubber Channel Set contains EIGHT (8) Rubber Channels that are 30 inches long.
Add to cart
Round Shim Set (18 Piece)
$59.58
The 18 Piece Duraflex ROUND Shim Set is used when installing a Duraflex “Short” Stand to a concrete pedestal to help level the stand.
Duraflex 16-foot Aluminum Springboard
$5,917.00
The 16 foot Duraflex Diving Board is an excellent choice for aquatic facilities that seek the quality of Duraflex products but lack the facility depth and dimension requirements for their competitive model Maxiflex and Modified Maxiflex Model "B" (Cheeseboard). This diving board is a great choice for summer swim clubs,
Add to cart
Duraflex Diving Stand Ladder Step Insert
$185.00
The new steps feature a two-piece design that allows replacement of the slip-resistant tread made from the same high-quality slip-resistant surface as a Duraflex springboard.
Select options
Duraflex Stand Installation Washer
$4.61
The Duraflex Diving Stand Installation Washer is required for any installation of a one-meter diving stand, three-meter diving stand, or short stand.
Add to cart
Anchor Fitting Black Strip
$17.28
Replacement Safe-T-Walk Strip for top of "Black Back" Anchor Fitting on post 2010 Maxiflex Model B Diving Boards.
Duraflex One-Meter Stand - Double Guardrails Both Sides
$13,213.00
The Duraflex One-meter Diving Stand is the commonly used diving stand for competition in the world, and when coupled with Duraflex Springboards, divers are given the best chance for success with the ultimate in springboard diving equipment.
SHIPPING COSTS AND DATES - Current events are impacting both shipping costs and shipping
Add to cart
Back Anchor Fitting Screw
$5.61
The Stainless Steel Flat Head Cap Screw for Bolting the BLACK BACK Anchor Fitting to Maxiflex Model B Diving Board.
Add to cart
Diving Stand Bronze Guardrail Bracket
$64.20
The Duraflex Bronze Guardrail Bracket connects the "straight" rail to the"curved" rail on Duraflex diving stands.
Duraflex Springboard Diving Board Factory Refinishing
$2,717.00
Refinish your old or worn out Duraflex or Maxiflex diving board and get years of new life for less than half the cost of a new board!
Product Note: The Duraflex International Corporation can only refinish diving boards that have a Duraflex Factory Applied Coating. Any diving boards that have been
Select options
Fulcrum Parts Kit
$1,055.00 – $1,116.00Price range: $1,055.00 through $1,116.00
The Duraflex Fulcrum Parts Kit includes everything you need for a Duraflex Fulcrum. Tie Plate, Footwheel, Rubber Bumber, Slide Bearming ... It's all there!
Add to cart
Square Shim Set (18 Piece)
$72.98
The 18 Piece Duraflex Square Shim Set includes 18 square shims of varying thicknesses, and is used when installing a Duraflex Diving Stand (1 Meter or 3 Meter) to a pool deck to help level the stand.
Add to cart
Fulcrum Tie Plate
$94.50
The Duraflex Fulcrum Tie Plate is the rectangular piece of anodized aluminum that holds ("ties") together the two Fulcrum Roller Block Assemblies (Item 517).
Read more$308.00 Original price was: $308.00.$155.00Current price is: $155.00.
Rebuilt Duraflex Hinge Assembly
This Reconditioned Duraflex Complete Hinge Assembly holds the diving board to the Anchor Fitting of Duraflex One-Meter, Three-Meter or "Short" Stands.
This item has been cleaned and re-built with NEW Hinge Pin (Item C203); NEW Nyliners (Item C209) and NEW O-Rings (Item C210) and includes NEW Hinge Attachment Bolts (Item SF106)
Read more$273.00 Original price was: $273.00.$140.00Current price is: $140.00.
Rebuilt Roller Block Assembly
This Rebuilt Duraflex Complete Roller Block Assembly attaches to the Fulcrum Stand Box (Item SB401C) and holds the Footwheel and Roller. Rebuilt using all NEW Duraflex parts.
Compare to a New Duraflex Roller Block Assembly (Item 517) priced at $273.00.
Limited Quantities … Act Now!
Duraflex Legacy Short Stand - Double Guardrails Both Sides
$10,084.00
Duraflex Short Stands provides a solid base for a new or used springboard, and will have less movement than full one-meter or three-meter diving stands. The version with guardrails is recommended for short stands installed as a stand-alone unit.
SHIPPING COSTS AND DATES - Current events are impacting both shipping costs and
Add to cart
Duraflex 6-Inch Rubber Channel Set without Glue Kit
$56.18
The Duraflex 6 Inch Rubber Channel Set with NEW 2-Part Glue Kit and Applicator includes EIGHT (8) Rubber Channels that are SIX (6) inches long.
Add to cart
Hinge Attachment Hardware Kit
$56.70
The Duraflex Hinge Attachment Harware Kit includes everything you need to attach ONE HINGE to a Duraflex Ladder Assembly! In order to repair both hinges you will need TWO of these kits.
Duraflex 14-Foot Aluminum Springboard
$5,571.00
The Duraflex 14-foot diving board is the perfect recreational choice for aquatic facilities that seek the quality of Duraflex products, yet lack the facility dimensions required for competitive diving equipment.
SHIPPING COSTS AND DATES - Current events are impacting both shipping costs and shipping dates for all Duraflex Springboards. Shipping costs for a
Add to cart
Fulcrum Expansion Pin
$9.72
The Duraflex Expansion Pin locks the Footwheel to Fulcrum Roller. This item is used when re-attaching a Footwheel to a Fulcrum Roller in the field.
