The Duraflex Fulcrum Slide Bearing is the small flat plastic piece that fits underneath the Fulcrum Roller Block (Item 517) and "slides" across the Fulcrum Slide Track (Item C208A). PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Roller Bearing is the round plastic sleeve that fits around the Fulcrum Roller. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Rubber Bumper fits between the Fulcrum Roller Block (Item 517 ) and Fulcrum Slide Bearing (Item 518) to allow fulcrum ease of movement and noise reduction. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
A Springboards and More EXCLUSIVE! The Fulcrum Repair Kit includes everything you need to repair ONE SIDE of a Duraflex Fulcrum Assembly EXCEPT the Roller Block! In order to repair both sides of fulcrum you will need TWO of these kits.
The Duraflex Roller Clamp Stud works in conjunction with the Roller Clamp Lock Nut (Item SF152) to hold the Roller Clamp (Item 521) in place. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Roller Clamp is the horseshoe-shaped metal piece that holds the Fulcrum Roller to the Roller Block Assembly (Item 517). PRICED INDIVIDUALLY - the two shown make up what is needed on one Duraflex Fulcrum.
The Duraflex Anti-Rattle Clamp fits underneath the Fulcrum Slide Track (Item C208A) and holds the Roller Block Assembly (Item 517) to it. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Anti-Rattle Bolt and Nut Set is the long aluminum bolt that goes through the Fulcrum Assembly and holds the Anti-Rattle Clamp (Item 516) tightly in place with the nut correctly adjusted.
The Duraflex Fulcrum Slide Track is attached to the Stand Box and allows the fulcrum to slide forward and backward underneath the springboard. PRICED INDIVIDUALLY - one slide track and five (5) installation bolts.
The Duraflex Stainless Steel Tie Plate Bolt, Nut and Washer are used to attach ("Tie" together) the Tie Plate (Item 522) to the two Roller Blocks (Item 517) on the fulcrum assembly.
The Duraflex 5/8 inch x 3 inch Aluminum Hex Head Bolt and Nut is used to attach the Fulcrum Box to the Main Support ("Legs") of a Duraflex Diving Stand.
The Duraflex Fulcrum Zerk Fitting is the small Grease Gun fitting found on each Fulcrum Roller Block (Item 517). PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Parts Kit includes everything you need for a Duraflex Fulcrum. Tie Plate, Footwheel, Rubber Bumber, Slide Bearming ... It's all there!
The Duraflex Fulcrum Tie Plate is the rectangular piece of anodized aluminum that holds ("ties") together the two Fulcrum Roller Block Assemblies (Item 517).
$273.00Original price was: $273.00.$140.00Current price is: $140.00.
This Rebuilt Duraflex Complete Roller Block Assembly attaches to the Fulcrum Stand Box (Item SB401C) and holds the Footwheel and Roller. Rebuilt using all NEW Duraflex parts.
Compare to a New Duraflex Roller Block Assembly (Item 517) priced at $273.00.
Limited Quantities … Act Now!
This product is the front portion of a Duraflex "Short Stand." It comes complete with Slide Tracks, Footwheel and Roller, all Fulcrum Parts and all installation hardware.
The Duraflex Footwheel is only sold attached to the Fulcrum Roller. The Footwheel with LONG Fulcrum Roller is used on Duraflex Diving Stands WITH guard rails.
The Duraflex Fulcrum box with Slide Tracks can be attached to to a cement pedestal when used as a Duraflex Short Stand. This item includes does not include pre-drilled holes to accept guardrail supports.
The Duraflex Fulcrum box with Slide Tracks can be attached to either a Duraflex Main Support (either 1M or 3M) or to a cement pedestal when used as a Duraflex Short Stand. This item includes pre-drilled holes to accept guardrail supports.
The Duraflex Footwheel is only sold attached to the Duraflex Fulcrum Roller. The Footwheel with SHORT Fulcrum Roller is used on Duraflex Diving Stands WITHOUT guard rails.
