This Duraflex Aluminum Hex-Head Bolt and Nut is used for attaching Hinges to the Back Anchor Fitting or "Short" Stand Back Anchor Fittings. PRICED INDIVIDUALLY - the four shown are what it takes to attach a Duraflex Hinge to a Back Anchor Fitting.
This Duraflex Aluminum Hex-Head Bolt and Nut is used to attach Guardrail "Arm" Supports to the Fulcrum Box AND for attaching "Cross Braces" to the Main Supports.
The 3/8 inch x 1 1/4 inch bolt is used to bolt the hinge plate to ladder. Heads of these bolts are painted. We recommend ordering a Buff Touch-Up Paint Kit to coat the threads and nut after assembly. Picture shown shows assembled and unassembled - Priced per one (1) bolt and nut.
The Duraflex Roller Clamp Stud works in conjunction with the Roller Clamp Lock Nut (Item SF152) to hold the Roller Clamp (Item 521) in place. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Anti-Rattle Bolt and Nut Set is the long aluminum bolt that goes through the Fulcrum Assembly and holds the Anti-Rattle Clamp (Item 516) tightly in place with the nut correctly adjusted.
The Duraflex Stainless Steel Diving Board Bolt and Nut are used to install any Duraflex Diving Board to any and all Duraflex Diving Stands. (Attaches diving board to Durafirm Hinges). Each order includes Two of these "Carriage" Bolts and Nuts - two bolts are required to install a Diving Board
The Duraflex Stainless Steel Guard Rail Attachment Bolt is used with the Stainless Steel Guardrail Clamp (Item C207) to attach Guard Rail Tubing to the Guard Rail Arms on all Diving Stands.
The Duraflex Stainless Steel Tie Plate Bolt, Nut and Washer are used to attach ("Tie" together) the Tie Plate (Item 522) to the two Roller Blocks (Item 517) on the fulcrum assembly.
Durafirm 5/8 inch Stainless Steel Hex Head Diving Stand Installation Bolt is used for attaching any Durafirm Stand or Durafirm Short Stand to Hilti Installation Kits or Duraflex Bronze Deck Anchors!
The Duraflex 5/8 inch x 3 inch Aluminum Hex Head Bolt and Nut is used to attach the Fulcrum Box to the Main Support ("Legs") of a Duraflex Diving Stand.
Duraflex Zinc-Plated Steel Diving Board Bolts are used for bolting a Duraflex Diving Board to a NON-Duraflex Diving Stand (where a standard 5/8 inch x 3 1/2 inch Bronze Board Bolt is not long enough). Two (2) are required for board installation.
Loctite 243 Threadlocker is used when installing, or reinstalling diving boards and carriage bolts and attachment bolts, or any item that requires a nut and bolt. This lubricant helps to hold nuts and firmly to a bolt reducing the chance of a loose nut and bolt.
This Duraflex Aluminum Hex-Head Bolt and Nut is used to when attaching the Diving Stand Aluminum Guardrail Bracket to the Short Stand Back Anchor Fitting. The Diving Stand Aluminum Guardrail Bracket is used to attach a guardrail to the diving stand.
