Close

SEARCH

Follow:
0

Category: Diving Facilities

Welcome to Springboards And More / Diving Facilities

Wrenches Needed for Duraflex Equipment Installation and Repair

By April 4, 2018 0
Torque Wrench with 15/16 Inch (24mm) Socket and 18 Inch (47cm) Long Handle (For putting correct amount of torque on diving board carriage bolts (110 ft/lbs. = 149 Newton/Meters)  WRENCH SIZE               WORKS ON THESE DURAFLEX PARTS 15/16 Inch (24mm)      SF108 / SF122 / SF127 / SF129 9/16 Inch (14mm)         528 / SF162 / SF104 / SF105 / SF106 ½ Inch (13mm)                526  / 529  / SF117  / SF118  / SF119  / SF152 3/8 Inch (10mm)            533 (Suggest 6-sided wrench) IN ADDITION, WE SUGGEST YOU HAVE THE FOLLOWING: Small Can of 3 in 1 Oil (For Hinges) Grease Gun with Grease (for Greasing Fulcrum) De-Greaser Spray and Rags (for cleaning slide tracks BEFORE applying new grease and also can be used to clean off the black stuff that always seems to run down the side of your fulcrum box).
Read More
Duraflex Short Stand Double Guardrails Both Sides

What Is That Noise?

By February 1, 2016 0
What is that loud noise coming from the diving board when being bounced? In most cases, this is due to one of two problem areas: the fulcrum or the hinge.
Read More
Quiet Place - Harmon Hall Residence

Alaska’s Only Outdoor Diving Board

By December 5, 2015 0
It might not be the be the best place to hold your college diving team training trip, but if you are looking for a beautiful place to get-a-way for rest and relaxation (and a little "chilly" springboard diving) why not check out "Quiet Place" -- in Halibut Cove, Alaska. The only way to get here is by boat or float plane. Your hosts are Harmon and Pauli Hall and Family. Their two sons (Garrett and Ian) were divers at Homer High School and their dad (Harmon) who was also the high school diving coach decided they needed a diving board on which to practice during the summer months when they live in Halibut Cove so  Harmon installed a Duraflex "Short Stand" with a 16' Modified Maxiflex Model "B" Cheeseboard so his sons could get some board time. Water depth beneath the diving board varies from 15 feet to 40 feet deep (depending on the tidal pool). Oh yeah -- one more thing -- the water temperature is "balmy"45 - 50 degrees in the summer. Wetsuits available for those who dare and if you do make it up there -- tell them Steve and Stan said hello! Visit http://www.quietplace.com/.
Read More

Doing Our Part

By January 28, 2015 0
At Springboards and More, "Every Day is a GREAT DAY for Diving"! Our mission is to provide you and your diving team with the finest springboard and platform diving equipment available. At the same time, we strive to be friendly to the environment and we work hard to minimize the waste that we produce.
Read More
Back to Top
Smack Suit Sizing Chart