Name: 2-Ply Gray Rough-Tex Remnants
SKU: 2PG-1
Price: 12.00 USD
Availability: InStock

2-Ply Gray Rough-Tex Remnants

SKU:2PG-1

These Rough-Tex Sections are remnants from prior installations or large orders and there is one section for each sized listed. These smaller sections are perfect for small applications, use on the side of a pool or replacement sections on your platform.

All Rough-Tex Remnant are sold “As Is” and all sales are final. Rough-Tex Remnants are non-returnable.

Rough-Tex is the preferred slip resistant surface for tower and platform diving structures and other high traffic areas at aquatic facilities. Springboards And More is the leading supplier of “Rough-Tex” Diving Platform Surfaces in the USA and beyond!

2-Ply Gray Rough-Tex is general purpose SBR rubber. The carcass is 2-Ply treated all synthetic fabric x bare bottom.
It is temperature rated from 0 degrees Fahrenheit with a product thickness of 17/64 inches.
We recommend that you attach this surface using any of a number of non-water soluble contact cements found at your local hardware store. In addition, we suggest using an edge sealing compound to seal the edges. if in doubt, we suggest that you hire a local flooring contractor to install your platform surface for you.
All Rough-Tex prices listed below are per LINEAR foot.
Adhesive is NOT included when purchasing Rough-tex but can be added to your order as a separate item.
Rough-Tex should always be installed IN LINE WITH THE DIVING PLATFORM – the direction in which the diver moves to leave the platform, and never across a platform. If Rough-Tex is installed across the platform, it does not have the same non-skid properties that it has when installed correctly in line with the platform.
Please Note: With any adhesive product, it is imperative that a “pull test” or “bonding test” be performed prior to attempting any installation. This is extremely important in order to make sure that the glue you choose to use adheres the product you order to the substrate of your diving platform or pool deck. Springboards and More assumes NO LIABILITY for any installation done without first doing a pull test or bonding test.