Quicksilver High-Performance Grease provides unequaled water resistance and protection for greasing fulcrum slide tracks and roller blocks.
The grease is highly water resistant, light colored and low staining with very low oil separation rate.
Protects under high loads and has excellent adhesion.
One 3 oz. cartridge tube of Quicksilver High-Performance Grease fits into the Duraflex Grease Gun.

Installation Tip: Prior to applying grease to your fulcrum area, use a rag and degreaser product to wipe off any existing grease, grime or dirt on your Fulcrum Slide Tracks. Then, using your finger, apply a THIN coat of Quicksilver High-Performance Grease to all four exposed sides of the Slide Tracks — Top, Outside, Inside and Inside Bottom. Then, put two “pumps” of grease into the “zerk” fitting (grease nipple) found near the bottom / side of each Roller Block Assembly.