The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Diving Stand to the pool deck. This product allows for the installation of either the front or back portions of a a 1m or 3m diving stand.
Duraflex Zinc-Plated Steel Diving Board Bolts are used for bolting a Duraflex Diving Board to a NON-Duraflex Diving Stand (where a standard 5/8 inch x 3 1/2 inch Bronze Board Bolt is not long enough). Two (2) are required for board installation.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a 1-meter or 3-meter Duraflex Diving Stand to the pool deck. Does not include Applicator Gun.
The Duraflex Diving Board Rubber Corner Piece plugs the tip-end of the diving board and is used on all Duraflex made Diving Boards produced after 1975.
Use the Duraflex 2-Part Glue Kit to attach the (Black) Rubber Channels to underside of diving board or to re-attach a Fulcrum Footwheel to the Fulcrum Roller (use Expansion Pin as well for this job).
Use the NEW Duraflex 2-Part Glue Kit with Applicator to attach the (Black) Rubber Channels to underside of diving board or to re-attach a Fulcrum Footwheel to the Fulcrum Roller (use Expansion Pin as well for this job).
This product is the front portion of a Duraflex "Short Stand." It comes complete with Slide Tracks, Footwheel and Roller, all Fulcrum Parts and all installation hardware.
The Duraflex Guardrail Bracket allows for the attachment of Duraflex Guardrails to the back of a Duraflex "Short Stand" where previously there had been none. Includes installation hardware.
The Duraflex One-Meter Ladder Assembly is available in FIVE (5) different heights that correspond to different pool deck to water levels. Choose the correct size for your pool by viewing the sizing chart.
The Duraflex Anchor Fitting (aka "Hinge Plate") is the cast aluminum piece that attaches to the top of a Durafirm One-meter or Three-meter Ladder Assembly. NEW and IMPROVED – the Anchor Fitting now comes with slotted (oval) holes allowing for left to right adjustment making diving board alignment quicker and easier.
The Duraflex Footwheel is only sold attached to the Fulcrum Roller. The Footwheel with LONG Fulcrum Roller is used on Duraflex Diving Stands WITH guard rails.
Loctite 243 Threadlocker is used when installing, or reinstalling diving boards and carriage bolts and attachment bolts, or any item that requires a nut and bolt. This lubricant helps to hold nuts and firmly to a bolt reducing the chance of a loose nut and bolt.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Short Stand to the pool deck. Does not include Applicator Gun.
A set of six (6) Duraflex Cast Bronze Diving Stand Anchors is used when pouring a new cement pedestal to attach a Duraflex Short Stand to the pool deck.
The Durafirm Guardrail Bracket allows for the attachment of Durafirm Guardrails to the back of a Durafirm "Short Stand" where previously there had been none. Includes installation hardware.
The Duraflex Double Guardrail Support ("Arm") attaches to the Fulcrum Box and holds the double guardrails. This item attaches to the left front or right rear of your Duraflex Fulcrum Box.
In order to receive an accurate quote, please download and completely fill out the Duraflex Guardrail Questionnaire, and return it
The Duraflex "Short Stand" Back Anchor Assembly is the "back part" of a Duraflex "Short Stand," and is attached to the concrete pedestal. This assembly is for short stands that include guardrails and DOES include hinges.
The Duraflex Fulcrum box with Slide Tracks can be attached to to a cement pedestal when used as a Duraflex Short Stand. This item includes does not include pre-drilled holes to accept guardrail supports.
The Duraflex Fulcrum box with Slide Tracks can be attached to either a Duraflex Main Support (either 1M or 3M) or to a cement pedestal when used as a Duraflex Short Stand. This item includes pre-drilled holes to accept guardrail supports.
Don't trust cheap imitations, the Duraflex Three-meter Diving Stand is the only competitive diving product that gives springboard divers a chance to compete on a level playing field with the rest of the world, and these stands will last decades with proper maintenance!
SHIPPING COSTS AND DATES - Current events are impacting
With improved feel, increased performance, and virtually maintenance free, the NEW Duraflex Short Stand follows the a long tradition of innovation and providing world-class competition diving boards, giving divers increased confidence, consistency and performance between diving board stands.
Virtually maintenance free
Increased performance and consistency
Easier fulcrum adjustments
Easier installation
Duraflex is pleased to introduce a new design of the Duraflex 3-meter ladder. Many new features enhance the usability and appearance of this new product. Divers will immediately notice the improved feel of this ladder. Does not include the anchor-fitting crosspiece and hinge assemblies.
The Duraflex One-Meter Ladder Assembly is available in FIVE (5) different heights that correspond to different pool deck to water levels. Choose the correct size for your pool by viewing the sizing chart. This item does not include Anchor fitting crosspiece and hinge assemblies
This Duraflex Aluminum Hex-Head Bolt and Nut is used to when attaching the Diving Stand Aluminum Guardrail Bracket to the Short Stand Back Anchor Fitting. The Diving Stand Aluminum Guardrail Bracket is used to attach a guardrail to the diving stand.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Diving Stand to the pool deck. This product allows for the installation of either the front or back portions of a 1m or a 3m diving stand.
The Hilti Stainless Steel Concrete Inserts are used when installing and attaching a Duraflex Short Stand to the pool deck. This product allows for the installation of either the front or back portions of a short stand.