Duraflex Nyliners (aka Hinge Pin "Bushing") surround the hinge pin in a Duraflex Hinge Assembly. FOUR of these are required to re-build ONE Hinge. PRICED INDIVIDUALLY - The four (4) Nyliners shown are what it takes to outfit one (1) Duraflex hinges.
The Duraflex "O" Ring for the Duraflex Hinge Pin, fits on the slotted groove at each end of the Duraflex Hinge Pin (Item C203) to keep the Nyliners (Hinge "Bushings" -- Item C209) and Hinge Pin from working itself out of the Duraflex Hinge. Two Duraflex "O" Rings are needed per individual
The Duraflex Fulcrum Slide Bearing is the small flat plastic piece that fits underneath the Fulcrum Roller Block (Item 517) and "slides" across the Fulcrum Slide Track (Item C208A). PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Fulcrum Roller Bearing is the round plastic sleeve that fits around the Fulcrum Roller. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
Duraflex Mystik JT-6 is a three ounce tube of clear water resistant grease that fits into the Duraflex Grease Gun (Item PM110). Use this to grease the Duraflex Fulcrum Slide Tracks and to pump grease into the "zerk" fitting (grease nipple) that is found at the base of each Fulcrum
This Duraflex Aluminum Hex-Head Bolt and Nut is used for attaching Hinges to the Back Anchor Fitting or "Short" Stand Back Anchor Fittings. PRICED INDIVIDUALLY - the four shown are what it takes to attach a Duraflex Hinge to a Back Anchor Fitting.
The Duraflex Complete Hinge Assembly holds the diving board to the Anchor Fitting of Duraflex One-Meter, Three-Meter or "Short" Stands. The Hinge Assembly comes with five (5) Duraflex 3/8 inch x 1 1/2 inch Aluminum Hex Head Bolt and Nuts (Item SF106), but does not include the Duraflex Diving Board
A Springboards and More Exclusive! The Duraflex Guardrail Clamp Kit includes all the neccessary hardware to keep your guardrail attached to the Duraflex Diving Stand. Keep a few extra Guard Rail Clamps and Installation Bolts on hand in the event that one breaks or is missing!
This Duraflex Aluminum Hex-Head Bolt and Nut is used to attach Guardrail "Arm" Supports to the Fulcrum Box AND for attaching "Cross Braces" to the Main Supports.
The Duraflex Hinge Repair Kit usually will solve the problem of the loud noise coming from the Hinge area when the diving board is bounced. The noise you hear is usually the result of broken or missing Nyliners (Item C209) and / or a moving Hinge Pin (Item C203). The
The 3/8 inch x 1 1/4 inch bolt is used to bolt the hinge plate to ladder. Heads of these bolts are painted. We recommend ordering a Buff Touch-Up Paint Kit to coat the threads and nut after assembly. Picture shown shows assembled and unassembled - Priced per one (1) bolt and nut.
The Duraflex Fulcrum Rubber Bumper fits between the Fulcrum Roller Block (Item 517 ) and Fulcrum Slide Bearing (Item 518) to allow fulcrum ease of movement and noise reduction. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex hinge pin inserts into both the male and female parts of the hinge, holding them together and allowing them to work properly as the diving board bounces.
A Springboards and More EXCLUSIVE! The Fulcrum Repair Kit includes everything you need to repair ONE SIDE of a Duraflex Fulcrum Assembly EXCEPT the Roller Block! In order to repair both sides of fulcrum you will need TWO of these kits.
The Duraflex Roller Clamp Stud works in conjunction with the Roller Clamp Lock Nut (Item SF152) to hold the Roller Clamp (Item 521) in place. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
Known to most divers and coaches around the world as the "CHEESEBOARD," the Maxiflex Model "B" Springboard is THE finest competitive diving board ever produced and has been used exclusively in all major diving events world wide since 1960, including the Olympic Games, World Championships and Pan-American Games.
SHIPPING COSTS AND DATES - Current
The Duraflex Fulcrum Roller Clamp is the horseshoe-shaped metal piece that holds the Fulcrum Roller to the Roller Block Assembly (Item 517). PRICED INDIVIDUALLY - the two shown make up what is needed on one Duraflex Fulcrum.
The Duraflex Anti-Rattle Clamp fits underneath the Fulcrum Slide Track (Item C208A) and holds the Roller Block Assembly (Item 517) to it. PRICED INDIVIDUALLY - the two shown make up what is required on one Duraflex Fulcrum.
The Duraflex Grease Gun is used to lubricate the Fulcrum Slide Tracks (Item C208A) and Roller Block Assemblies (Item 517) on a Duraflex Fulcrum Assembly.
The Duraflex Fulcrum Anti-Rattle Bolt and Nut Set is the long aluminum bolt that goes through the Fulcrum Assembly and holds the Anti-Rattle Clamp (Item 516) tightly in place with the nut correctly adjusted.
The Duraflex Fulcrum Slide Track is attached to the Stand Box and allows the fulcrum to slide forward and backward underneath the springboard. PRICED INDIVIDUALLY - one slide track and five (5) installation bolts.
The Duraflex Stainless Steel Diving Board Bolt and Nut are used to install any Duraflex Diving Board to any and all Duraflex Diving Stands. (Attaches diving board to Durafirm Hinges). Each order includes Two of these "Carriage" Bolts and Nuts - two bolts are required to install a Diving Board
The Durafirm Diving Stand Guardrail Plug inserts into the end of each guardrail. It is not only a safety feature, but also it helps keep noise level down when diving boards are in use.
The Duraflex Stainless Steel Guard Rail Attachment Bolt is used with the Stainless Steel Guardrail Clamp (Item C207) to attach Guard Rail Tubing to the Guard Rail Arms on all Diving Stands.
The Duraflex Calibrated Strip is the 1-9 Number Sticker that attaches to the diving board in the fulcrum area so the diver knows on what "number" they should set the fulcrum prior to doing a dive.
